Re: [Chrysler300] Bumper Boyz

[mjraguse@xxxxxxx]

In a message dated 6/22/2006 10:07:04 PM Eastern Daylight Time, 
fabe7445@xxxxxxxxxxxxx writes:
When I asked about the condition I was told to wire
   brush the area and paint it with aluminum paint.

This is true.  I have restored bumpers and on the back side I would sand them 
and actually fill any pits with filler and then paint with a chrome 
paint..The results were superb and we are talking about a '33 Plymouth bumper where the 
back side is visible from above.  Worth the effort.  Any over spray onto the 
chrome is easily removed with lacquer thinner on a rag wiped over the chrome 
edge... 


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/6pRQfA/fOaOAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/