[Chrysler300] Dual reservoir brake master cylinder on 300C or D

["Owen Grigg" <ram300@xxxxxxxxxx>]

Anybody out there been able to successfully fit the AAJ dual master cylinder
(early B body m/c) to their C or D without altering the driver side valve or
plug wire cover on the hemi? Is it possible. If so how'd you do it
.machining the m/c body?

 

Thanks again for the help.

Owen 



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/