[Chrysler300] adding a mirror to 62 H convert!

[Kenneth Wilson <jblken@xxxxxxxxxxx>]

Anyone out there with a 61/62 300  convertible  - I need  your input!

I want to install a remote control mirror and do not know the relative 
location of the mirror switch is to the location of the convert top 
bezel switch.

  My 62 H convert has only a convert top switch (bezel) on left side of 
 the dash (lower left of steering wheel),  If I install the remote 
mirror control bezel  in place of the existing location of the top 
switch bezel hole  -where would I cut the hole for relocating the 
convert top switch bezel ?  Cut the bezel hole right side of steering 
wheel  or the left side of the steering wheel next to the existing bezel 
hole?  The car does not have A/C so there are no bezel control holes on 
right side of steering wheel.    If the dealer had installed a remote 
mirror I would assume the dealer  would not change the existing location 
of the top switch. - so I  wonder which side of the steering wheel he 
would install the mirror control bezel?  Where would the factory have 
installed the two bezels in a non A/C car?

Thanks in advance  -  Ken Wilson,   San Jose, Calif.



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/