[Chrysler300] Solid State Voltage Regulator

["Doug Warrener" <dwarrener@xxxxxxxxxxxx>]

John, Do you still have your solid state voltage regulators for sale? I
need one for my new H. Also, thanks for the advice on the 63/64 brake
swap. I have located a 63 Newport for the parts and may make the change
unless I decide to go to disc brakes. I am also considering changing the
master cylinder to the dual chamber type. Anything to watch out for or
any advice on this change?   
 


________________________________

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of John J. Hertog
Sent: Sunday, April 16, 2006 4:53 AM
To: 'Gary Barker'; 'Gary Holm'
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Real bad Brakes


Hi Gary, 

I don't have the answer as to what may be the cause, but I sure have  a
solution.  Get rid of those stupid brakes and replace them with a '63 or
'64
Chrysler Bendix setup (get them from any Newport, 300, NewYorker).  It's
a
three-bolt bolt-on.  

The 61 Newport as well as the 62 are Sort Wheelbase cars - same as any
63 or
64 Chryslers model. You just need to remove the entire spindle and
steering
arm assemblies  and swap them. 

I did this to my '61 Newport as well as to many other Short Wheelbase
Chryslers, the results are phenomenal, the car stops perfectly, straight
and
true, no more locking up, no more pulling, no more problems. 

John Hertog
Sag Harbor NY

Gary Holm wrote:

>I have a friend who has two 1962  New Ports that pulls and or locks up
so
bad that they stop in traffic. He has taken them to brake shops in two
different towns. to no avail. The left front is the worse one. He
replaced
the linning ,hoses ,  and cylinders. Most of the time by backing up it
will
release and go untill the brakes are used again. He is ready to sell if
he
can't find out why. I have a 61 New Port that I drive as a daily driver
that
does the same thing but, not nearly that bad. Anyone out there have the
answer as to what might be the cause???? Gary Holm in wet and wild So.
Oregon 


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm 



________________________________

YAHOO! GROUPS LINKS 


	
*	 Visit your group "Chrysler300
<http://groups.yahoo.com/group/Chrysler300> " on the web.
	  
*	 To unsubscribe from this group, send an email to:
	 Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<mailto:Chrysler300-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> 
	  
*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 


________________________________




[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get to your groups with one click. Know instantly when new email arrives
http://us.click.yahoo.com/.7bhrC/MGxNAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/