
RE: [Chrysler300] 300C chassis on eBay
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Chrysler300] 300C chassis on eBay
- From: <john_nowosacki@xxxxxxxxxxx>
- Date: Tue, 4 Apr 2006 13:09:10 -0600
I second the motion, and it would be accepted into my fleet if restored in that manner, especially after seeing the law as it applies to the Camaro unibodies now available for sale.
John
-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Darrin Bailey
Sent: Tuesday, April 04, 2006 3:04 PM
To: lmbarrie@xxxxxxxxxxxxx; Chrysler 300 Club International, Inc.
Subject: RE: [Chrysler300] 300C chassis on eBay
Seems logical to me. I cannot see how rebuilding it from the chassis up
is different that taking the original complete damaged car home, then
going to a junk yard and swapping parts with another 57 Chrysler
product, thus replacing every door, fender, quarter panel, etc., etc.,
etc. The seller is upfront about the situation. This is a full body
off restoration project if anyone wants to tackle it.
Darrin Bailey
-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of Louis M. Barrie
Sent: Tuesday, April 04, 2006 2:53 PM
To: Chrysler 300 Club International, Inc.
Subject: [Chrysler300] 300C chassis on eBay
Here is the note that I sent regarding the eBay listing for the 300C
chassis:
What makes you think that the Chrysler 300 Club International will
manufacture a phony VIN plate for this chassis or even recognize any
bastard
300 that is built from it?
Here is his response (unaltered):
THERES NOTHING PHONEY ABOUT THIS CHASSIS OR THE vIN PLATE. tHIS IS A 57
300-C CHASSIS WITH ITS ORIGINAL TITLE AND VIN PLATE. THE BODY WAS SO
BADLY
RUSTED AND DAMAGHED IT COULD NOT BE SAVED. I STILL HAVE THE FIREWALL,
COMPLETE AIR CONDITIONING SYSTEM, ORIGINAL BLOCK ALTHOUGH CRACKED, AND
THE
ORIGINAL INTERIOR.WHAT MAKES YOU THINK IT WON'T BE ACCEPTED BY THE 300
CLUB
IF ITS BUILT BACK WITH A SARATOGA BODY WITH THE 300 FRONT SHEET METAL
AND
300 INTERIOR. I ALSO HAVE THE ORIGINAL TORQUEFLITE AND DRIVE SHAFT.
BOBBY
This guy has a lot to learn.
Louis Barrie
West Hills, CA
Home of Big Yellow
[Non-text portions of this message have been removed]
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap