RE: [Chrysler300] (no subject)

["Matt Allyn" <mallyn@xxxxxxxxxxxxxxx>]

I have decided to make my own sets out of 7mm Belden wires.
Below are the Belden part numbers I have obtained, through Napa, to make my
own sets.
The wires are black.
The distributor cap ends are orange and straight.
The plug wire ends are orange and straight.

Spark Plug Wire (Black)	Belden	#734601
Spark Plug Boots (Orange)	Belden	#727401
Spark Plug Terminals	Belden	#727005
Distributor Cap Boots (Orange)	Belden	#727302
Distributor Cap Terminals	Belden	#727003 





-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of MJMLandDev@xxxxxxx
Sent: Tuesday, March 14, 2006 6:42 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] (no subject)

Where is a good source for good 7mm spark plug wires or good 7mm spark plug
wire sets?
 
Mike Meyer


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links



 







To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/