
Re: [Chrysler300] glass problem and question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] glass problem and question
- From: "Roger Schaaf" <obiwan10@xxxxxxxxxxx>
- Date: Wed, 8 Mar 2006 08:59:40 -0800
Be very cautious with steel wool, it can and will leave very fine scratches
on some auto glasses. Even 0000 versions should be a concern.
Roger Schaaf
----- Original Message -----
From: <smopar@xxxxxxxxxxxx>
To: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
Cc: <Chrysler300@xxxxxxxxxxxxxxx>; <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Tuesday, March 07, 2006 5:34 PM
Subject: Re: [Chrysler300] glass problem and question
> John, what I have used to remove this lime or calcium type deposit is
> steel wool. It takes time and a lot of effort, but it will come off. I
> tried some of those bathroom cleaners that are used to remove lime, but
> they didn't work. Only steel wool has been successful for me, and then I
> did not wet it since it would reduced the effectiveness of the effort.
> Good luck.
> Steve Albu
>
> ---- "John J. Hertog" <crossram@xxxxxxxxxxxxx> wrote:
>> Hello there..
>>
>>
>>
>> On my '61, at the lower edge of the glass, where it meets either the
>> gasket
>> (if windshield or back window) or where it meets the metal frame (if
>> side
>> glass), there is a layer of "stuff" that just won't come off - on the
>> OUTSIDE of the glass, only. It appears that this "film" was left there
>> by
>> leaves and various crap, as the car sat outside for years. It is NOT
>> delamination of the glass - it most definitely is on the outside. It
>> looks
>> like whitish, frosty stuff. almost like what it would look like if the
>> glass
>> had been sandblasted.
>>
>>
>>
>> It's really strange, careful work with a razor blade will remove some of
>> it,
>> but it's very slow and tedious. In some areas, the razor blade won't even
>> remove it.
>>
>>
>>
>> Has anyone experienced anything like this and come up with a solution for
>> getting rid of this crap ?
>>
>>
>>
>> John Hertog
>>
>> Sag Harbor NY
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> To send a message to this group, send an email to:
>> Chrysler300@xxxxxxxxxxxxxxx
>>
>> For list server instructions, go to
>> http://www.chrysler300club.com/yahoolist/inst.htm
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
>
>
I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap