[Chrysler300] 300F questions -

[cpaviper@xxxxxxxxxxx]

Looking for help on a couple 300F coupe items -
 1.  Source for an outer rear axle bearing - right side

2.  I saved Fern Rivard's 11/25/05 and 12/21/05 emails re: camshaft specs for a 300K, with recommendation to Hughes Engines.  The engine's current cam is more radical than a stock cam, and we're looking to go back down to stock, or some more modern grind that will improve driveability.  Our mechanic called Hughes who acknowledged that he's produced a variety of cams for 300's, but didn't save the specs in his computer files for these.  Do any of you have specs you can offer?  Also, could there be a different recommendation on the 413 blocks with, or without, the HP stamping that Gil Cunningham refers to in his 1/8/06 email. Since the 300's up on the hoist, I wasn't able to get the engine stamping today.  Aside from low RPM idle and vacuum issues, the 300's running great.

Thanks,
Noel Hastalis, IL  
My Cousin's 300F

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/