Re: [Chrysler300] Mopar contact

["Ron Stewart" <rstewart@xxxxxxxxxx>]

 you need to buy from mopar their big block engine book page 252 of the 
mopar performance book. tells everything.mopar has a hydralic cam that was 
in the 6- pak 440.s that used mechanical rocker arms inseadt, of hydralic 
rocker arms , works well i have that setup on 413 boat engine .that cam is 
very similar to the old one. ron

----- Original Message ----- 
From: "Carlton Schroeder" <schroe99@xxxxxxxxxxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, February 07, 2006 8:24 AM
Subject: [Chrysler300] Mopar contact


> Good morning,
>
> First I want to thank everyone for their helpful comments and especially 
> Pete Fitch and Ron Stewart for steering me to Mopar for the parts I need 
> for my 413 rebuild.
>
> I've been pleasantly surprised at what all is offered for the older 
> Chrysler engines.  Everything for the rocker system is there along with 
> some cam choices.  I would like to get the cam and lifters from Mopar too 
> but I can not get any advice from Mopar.  My Chrysler parts man is trying 
> to help but that hasn't resulted in much.  From the website and the Mopar 
> book it looks like there are only 4 mechanical cams and even the mildest 
> has much more lift and duration than the original H - it doesn't look 
> anywhere close to the original.  Does anyone have a Mopar phone number for 
> technical questions.  The only number I have is for buying caps and 
> t-shirts and that lady had no other number (the Chrysler parts man is also 
> searching for a number).  You can ask a question on the web - which I 
> have - but they only post and answer more general interest questions.
>
> There are other cam/lifters available to me, but if I could get everything 
> from Mopar I'd prefer that.
>
> Thanks,
>
> Carlton - finally cooling off here in the Northwood's
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
> 




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/