[Chrysler300] '62 300 AC Switch

["Matt Allyn" <mallyn@xxxxxxxxxxxxxxx>]

My latest findings:
Just put in a brand new switch and have made sure all 7 vacuum hoses are going where they shouild be. 

I know the blue wire goes to the top/center connector (one closest to the vacuum hoses. I believe the connector below it, in the center stays empty. That leaves the following wires for the "U" shaped connectors:
Black with white tracer
Green
Brown with Blue

A test light shows power to the green wire with the ignition switch on, but no power at black wire.  I thought the power was provided by the black wire?  Also I can get all fan speeds in the two AC positions (buttons depressed), but no fans when I push heat or defrost.

Very confused. 
Please help. 

Matt Allyn
Exec. in Charge of Prod.
Granada America
323-785-2129 office
323-785-2151 fax
562-533-2551 cell


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/