Hi All (and a Happy Holiday to Everyone) Out There in 300 Land! Had a compressor rebuilt, clutch is fine, replaced the EPR valve, had the system charged however: (1) on the low side it gets cold - can see the condensation; (2) on the high side, the pressure is only about 125 (not good, I know - should be about 200); (3) air coming out the vents is not that cold - maybe 65 - 70 degrees; and (4) eyeglass appears cloudy. I figure there is a minor problem somewhere in the system, but not sure where. Any help here? Tom Miami, Florida [Non-text portions of this message have been removed] ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/8LmulB/TM --------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/