Re: [Chrysler300] Camshaft specs for 300-K

[lettercars@xxxxxxx]

Hi Tim and All:
The camshaft for the 300F, G, and non-ram 300K is the same: PN  2129203.  
This cam was also used in the high performance 383.  It is  the one the Club 
sells, although I don't know what the availability is at the  moment.  The 
duration is 268 degrees, both on intake and exhaust.   Overlap is 48 degrees.  
300ly, Gil Cunningham
 
 
in a message dated 11/24/2005 1:50:57 AM Eastern Standard Time,  
tomlin@xxxxxxxxx writes:

Group,
1.  I am again rebuilding a motor for a 300-K, with the  single four barrel 
carb.
2.  Camshaft is toast and needs to be  replaced.  Shop manual gives the lift 
for the VC-2 300-K, 360 HP version,  but not the overlap and duration.
3.  I know the club has an exchange  capability for 300-F, etc, but don't 
think so for the 360 HP version of the  300-K.
4.  Can someone with full knowledge pass on the specs for the  proper or even 
slightly hotter cam for the single four barrel  version?
Thank you.
Tim Tomlinson
2-  300-K's






[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
AIDS in India: A "lurking bomb." Click and help stop AIDS now.
http://us.click.yahoo.com/VpTY2A/lzNLAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/