[Chrysler300] Rear main seal for a "G".

[Marshall R Larson <yelof@xxxxxxxx>]

The side seals for the rear main seal retainer that came in the new
gasket set are the same size for their entire length.  The old side seals
had a rectangular end about 1/4 X 1/2 X 1/2 that fit into the
corresponding relief in the retainer surface that bottoms against the
block.  The new side seals will not fill that void.  Do I fill that area
with silicone or are the old style side seals available?  Thanks for your
help.

Minnesota Marshall
Red G,  27 & 28 Dodge Brothers.
 


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/