[Chrysler300] Oil Filler/Breather Cap - reply

["John J. Hertog" <crossram@xxxxxxxxxxxxx>]

Hi Rich,

What I have done is cut up a coarse 3-M scuff pad lengthwise into strips, 
and  pushed the strips into the cap via the vent holes . Don't know if  this 
is a good idea or a bad one, but it's what I came up with ... seems to work 
just fine...

John Hertog
Sag Harbor NY


----- Original Message ----- 
From: "Richard Osborne" <richard@xxxxxxxxxxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, July 18, 2005 9:45 PM
Subject: [Chrysler300] Oil Filler/Breather Cap


> Good Evening,
>
> What is the recommended stuff that should be used to put back into the oil 
> filler/breather cap on the G? I'm refering to the mesh filter media that 
> helps to keep the oil vapors from getting everywhere.
>
> Thanks,
>
> Richard Osborne
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>
>
>
> 




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/