[Chrysler300] Power Window Switches -- Cleaning

["Michael Reed" <mrreed@xxxxxxxxxxxxxx>]

The power window switches on my "F" need cleaning -- they're 
intermittent, no doubt due to non-use for 21 years. They (eventually) 
work if "wiggled " sufficiently.

I have a product called PenSolv 100, made by West Penetone, for 
cleaning dirty/oxidized/etc. electrical contacts. It states that is is 
safe for most plastics and rubber, but not recommended for acrylic, 
polystyrene and polycarbonate.

Does anyone out there have any experience with this product, or have a 
suggestion as to whether it sounds safe to use for the windows 
switches?

Any help appreciated.

Thanks, Mike




------------------------ Yahoo! Groups Sponsor --------------------~--> 
In low income neighborhoods, 84% do not own computers.
At Network for Good, help bridge the Digital Divide!
http://us.click.yahoo.com/B9pRWD/3MnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/