[Chrysler300] 6v restor

["James McMullan" <macthehammer@xxxxxxxxxxxxx>]

Rich and list.There is no need for a ballast resestor on a 6 volt system. 6 volts will not fry the points,12 volts WILL  at slow speed( too much saturation time) The resistor soaks up excess current and converts it to heat passing about 5 volts to the points.When the rpm comes up the pulses are shorter and it cools and passes more voltage .12 at 2000 or so.There is a bypass from the starter circuit to give 12 volts for start. (another water clock) Jim McMullan 300 F  
James McMullan
macthehammer@xxxxxxxxxxxxx
Why Wait? Move to EarthLink.

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/