Re: [Chrysler300] wanted tool to remove nut on power antenna

[Ray Jones <hurst300@xxxxxxxxxxx>]

It looks like a open end wrench with two prongs sticking down. You can 
make one from a Coat hanger or better yet  some heavy stiff wire.
A piece 6" long with 1/4" bent down 90° on each end, and then bent in a 
"U" shape with the two ends close enough to go into the holes.
Insert into the holes and rotate around. This is sort of an anti-theft 
devise. Put a heavy towel all around the Antenna, in case you slip off.

Ray
On Mar 28, 2005, at 9:43 PM, Fern Rivard wrote:

> ??? I have a power antenna here that has two holes that are 180 
> degrees from
>  each other on the top chrome nut that sits on the top of the fender 
> when the
>  antenna is installed.? Does anyone know just what that tool looked 
> like that
>  was used to remove that chrome nut?? There is NO flat spot on that 
> chrome
>  nut (as seen on a lot of them) to just use a normal wrench.
>  Thanks from Fern
>
>
>
>
>
> To send a message to this group, send an email to:
>  Chrysler300@xxxxxxxxxxxxxxx
>
>  For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
> <22305_0205_016_b_300250_a.png>
> <l.gif>
>
> Yahoo! Groups Links
>
> 	? 	To visit your group on the web, go to:
> http://groups.yahoo.com/group/Chrysler300/
> ?
> 	? 	 To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> ?
> 	? 	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service.
>
>  

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/