Re: Re: [Chrysler300] 300g brake system

[<smopar@xxxx>]

> Are you sure the person pressing the brake pedal is waiting to release the pedal until the bleeder screw is retightened during the bleeding process? Otherwise, air gets sucked back in the bleeder. 
Steve Albu
> From: "Don Verity" <d.verity@xxxx>
> Date: 2004/01/03 Sat PM 07:02:27 EST
> To: "300club" <Chrysler300@xxxxxxxxxxxxxxx>, 
> "William Barrie" <blueweststudio@xxxx>
> Subject: Re: [Chrysler300] 300g brake system
> 
> Sounds like the shoe adjustment is way off to me. I would adjust the brakes
> and check again.
> 300ly,
> Don
> ----- Original Message -----
> From: William Barrie <blueweststudio@xxxx>
> To: 300club <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Saturday, January 03, 2004 10:57 AM
> Subject: [Chrysler300] 300g brake system
> 
> 
> HAPPY NEW YEAR FELLOW MEMBERS,
> 
> I just installed a new master cylinder and I have a problem.Here's
> whats happening. First, all the wheel cylinders have been rebuilt, new lines
> and no leaks.I bench bled the master cylinder following the supplyer's
> instructions, prior to installing. After installing the master, I re-bled
> all the brake lines in the proper order.Now, when I first press the brake
> pedel, it goes to the floor and after a few pumps it is up fully.While
> applyingconstent pressure to the pedel, the pedel remains firm. If I
> release, and wait 30 seconds, the pedel will now go to the floor when
> depressed.Three more complete line bleeds and the same result. Did I do
> something wrong when I bench bled the master cylinder?
> 
> Thank you,
> Barrie
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Free Pop-Up Blocker - Get it now
> 
> [Non-text portions of this message have been removed]
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> 
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Chrysler300/
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
> 
> 
> 
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Chrysler300/
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/ 
> 
> 
>