Re: [Chrysler300] Any Interest in a High Speed Starter for413Cast Iron 727 DriveTrains?

["G EDMONDS" <georgedmonds@xxxx>]

----- Original Message ----- 
From: "Tony Rinaldi" <awrdoc@xxxx>
To: "Owen & Jo Grigg" <ram300@xxxx>; <tim.wood@xxxx>
Cc: "Chrysler 300 Club" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, September 05, 2003 9:24 AM
Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for413Cast
Iron 727 DriveTrains?


Hi Tim,

Owen Grigg suggested that I contact you and see if you can help us owners of
'59-'61 with Chrysler 413 wedge/cast iron 727 TF drive trains get high speed
starter replacements. Also '55-'58 hemi drive trains.

The '59-'61 set ups have longer drive shafts and cannot interchange with the
available high speed starters that are compatible with the '62 and later
aluminum TFs which fit the shortened drive shafts of the later 413s.

Tony Rinaldi

> From: "Owen & Jo Grigg" <ram300@xxxx>
> Date: Fri, 5 Sep 2003 14:26:21 +1200
> To: "Tony Rinaldi" <awrdoc@xxxx>
> Subject: Re: [Chrysler300] Any Interest in a High Speed Starter for
413Cast
> Iron 727 DriveTrains?
>
> Tony,
> If you would like to speak with someone who knows all about these high
> speed, high torque starters, contact Tim at Roadrunner Starters on
> tim.wood@xxxx
> Owen
> ----- Original Message -----



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/