Re: [Chrysler300] Bracket from 300 G

["Kelly Pierce" <jkrestor300@xxxx>]

Lauren-
If your battery tray is the same as the J- I just went out and looked
at it- There is a brace on it that looks like the one you describe. One end
bolts to the bottom of the rear of the tray and the other(smaller bolt hole)
bolts to the upper control arm bracket/brace. Hope this helps you out. Joe
Pierce 300J,Kx3 M+ others.
----- Original Message -----
From: "Lauren R Lampi" <lrlampi@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Saturday, March 22, 2003 10:46 AM
Subject: [Chrysler300] Bracket from 300 G


> Hi All,
>
> Need the help of the Club to aid in the identification of a
> bracket that I removed in engine compartment 4 years ago.
> Starting to put the G together now. It was -15* here in
> northern Minnesota 2 weeks ago. Last weekend it was +60*
> and the snow has melted like crazy. It's 50* today, and
> Getting the itch to work on the car. Been a long, cold winter.
>
> Bracket from:
>
> 300 G coupe, engine compartment, (in same box as battery tray.)
>
> part number on bracket : NM - 40 -1
>
> Part is about 8 inches long, 1 inch wide.
>
> one end has 3/8 " hole ( has about a 20* bend )
>
> other end has 3/8 " by 1 inch hole (slot)( has about 15* bend)
>
> I thought it was a battery tray support bracket, but no holes line up.
>
> Question for the group is: What is it and where does it go.
>
> Thanking you in advance for your help,
>
> Lauren R Lampi
> 300G coupe
> Grand Rapids, Minnesota
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>