Re: [Chrysler300] DeSoto Fulie

["Don Verity" <d.verity@xxxx>]

Hi Bob,
The distributor I think you are looking at is the one for the fuel
injectors. If you look close, you will see the standard distributor next to
it. The injectors are timed off a tach drive distributor with an adapter. I
gave Tom the distributor that is in the car. It's a 413 unit that Tom had
the shaft shortened on to work on a 383.
300ly,
Don
----- Original Message -----
From: Bob Jasinski <rpjasin@xxxx>
To: Chrysler 300 Email Network <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, March 03, 2003 9:31 PM
Subject: [Chrysler300] DeSoto Fulie


> I noticed that the distributor was not a stock Chrysler unit, but rather a
Mallory type. Was this the factory installed distributor on the fuel
injected cars? My 300G came with the same type of distributor when I bought
it back in '78, I still have it.
>
> Bob J
>
> [Non-text portions of this message have been removed]
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>