Re: [Chrysler300] C300 Guages Part 2

["Owen & Jo Grigg" <ram300@xxxx>]

I would talk to Greg Leggatt about a wiring harness, he advertises in the
Club News and has a listing on the Club website. He doesn't list a '56 but
he may be able to help you out.

I recently helped a friend fit a Painless harness to his '67 Camaro, easy
enough to fit, but some strange circuitry, for instance, it had power on the
reverse light & blower fan circuit all the time, ignition key in or out. The
harness was all hard wired into the large aftermarket blade-type fuse box so
you can't change things around either. That was the hardest part, fitting
that large darn fusebox under the dash! If you want original, or close to
it, these aren't the way to go in my opinion.
Just my 2c worth
Owen
----- Original Message -----
From: Frank Bakanau <FBAKANAU@xxxx>
To: chrysler <chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, February 14, 2003 3:58 PM
Subject: [Chrysler300] C300 Guages Part 2


> I decided that the entire wiring mess has to go. "Painless" makes an 18
> circuit harness that I can install. As for the gauges, how about getting
a
> '56 12 volt set (fuel, sender and temp). You gotta see this mess to
> understand how frustrated I am. So, a new harness, I do the work, and use
> '56 gauges. Sound like a plan?
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>