Hi Gang: My J has a transmission leak. I will have somebody look at it soon. I presume that the seals are worn out, or the screws might need to be tightened ??. I am planning to just add some type of product to see if it will make any difference for the time being. Have any one of you used any of these things with any success? If so, what is it called? Also, are the seals made out of rubber or some kind of cork/rope material, and where could I get them? I apologize for my lack of knowledge, and I thank you all for your help. I also want to let you know that I have been also to start the car successfully every morning (I had asked for your help since the "car will not start") I just drove it one day about a total of 40 miles, and I "drove it hard" like one of you suggested. I then added a carburetor cleaning solution to each carb while running and pulling the throttle. I have been starting the car daily, and I only crank it for about 10 seconds once to three times, and it starts!! That's exciting. I will slowly implement all the ideas I got from you. Again, excuse me if I write too long; I don't intent to bore any one, I just want to share my experience. This car looks very nice, and it need minor work (I think) here and there to be a smooth and trouble free vehicle. Thanks in advance for all your help and ideas. Dee [Non-text portions of this message have been removed]