Re: [Chrysler300] Ram Paint

["Larri Stumpf" <moparlarri76@xxxx>]

What timing, I just rebuilt my carbs and planned on painting the rams 
tomorrow as I'm trying to get the setup back on my 'G' before going to the 
300 meet in Phoenix in just two weeks.Still need a little advice, what paint 
to use on the air cleaners, can I take vacuum from one carb for the 
distributor advance(I dont have any of the vacuum advance hardware and it 
seems to me that I remember plstic tubes that were somehow joined together 
that went to the distibutor)and are there airfilters that will work that can 
be ordered from a local parts house?Its been 10 years since my last ram car 
(1960 Polara wagon with D-500 option) and am exited to hear that special 
sound they make when you stick your foot in it not to mention the difference 
it should make to the 440 I'm running on one carter 625 cfm now.Thanks and 
will se ya at Phoenix either with 625cfm or 1000 cfm, ha, larri.







> From: lettercars@xxxx
> To: chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] Ram Paint
> Date: Sun, 5 Jan 2003 09:02:11 EST
>
> I have some very good news to start the year! Through the efforts of Dave
> Schwandt, we have a paint for the 1960-61 ram tubes. It is a Cummins 
> engine
> paint, that Dave says is available at any Cummins engine shop. Ask for PN
> 3163075 Apex Red. It apparently also goes by Rouge Red and perhaps Rojo 
> Red.
> It comes in 12 oz cans.
> The sample Dave sent me matches the Chrysler ram red master even better 
> than
> the old Martin Senour #7956 did. Hopefully, all of you that need this 
> paint
> will be able to find it and proceed with those "F" and "G" restorations.
> 300ly, Gil Cunningham
>
>
> [Non-text portions of this message have been removed]


_________________________________________________________________
The new MSN 8 is here: Try it free* for 2 months 
http://join.msn.com/?page=dept/dialup