RE: [Chrysler300] Penetrating Oil

[john_nowosacki@xxxx]

My dad used to work in a steel mill, and they had some nasty smelling stuff called Tascon. It comes in a green and white striped round 1 qt can with black lettering.
It never met a bolt it couldn't unstick. Don't think it's legally available over the counter anymore, but if you see some at a swap meet, give it a try.
John

-----Original Message-----
From: Kelly Pierce [mailto:jkrestor300@xxxx]
Sent: Sunday, December 01, 2002 10:00 PM
To: Chrysler300@xxxxxxxxxxxxxxx; News4ge@xxxx; Don Verity
Subject: Re: [Chrysler300] Penetrating Oil


I must agree that PB Blaster is as good as it gets-- and it is not
expensive, easy to find and works fast. Mopars manifold solvent works well
but is pricey in comparison. PB has saved me a lot of skinned knuckles and
%#&*@ language! If you have not tried it pick up a can next time you are in
the automotive section at Wal-Mart, or stop at Napa. PS- I finally got a
300M and couldn't be happier with it. What a automobile! By the time it's
paid for I should be able to buy a V8 300N....... Joe Pierce 300Kx2, 300M
plus others.
----- Original Message -----
From: "Don Verity" <d.verity@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>; <News4ge@xxxx>
Sent: Sunday, December 01, 2002 8:23 PM
Subject: Re: [Chrysler300] Penetrating Oil


> Mopar makes a good penetrating oil called "manifold heat control solvent".
> It works very well for me under most circumstances as does PB Blaster.
> Sometimes nothing else will work though except heat.
> 300ly,
> Don
> ----- Original Message -----
> From: <News4ge@xxxx>
> To: <Chrysler300@xxxxxxxxxxxxxxx>
> Sent: Sunday, December 01, 2002 7:52 AM
> Subject: [Chrysler300] Penetrating Oil
>
>
> > Hi, All,
> >
> > What's the best penetrating oil now? Is there now something better than
> > Liquid Wrench?
> >
> > Thanks,
> >
> > George Clineman
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > To send a message to this group, send an email to:
> > Chrysler300@xxxxxxxxxxxxxxx
> >
> > For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> >
> > To unsubscribe from this group, send an email to:
> > Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/