Re: [Chrysler300] engine basics - ignition help needed

["Ryan Hill" <ryan_hillc300@xxxx>]

If your ignition and cam timing are all verified and you have fuel and 
spark, your next step is to check the compression. What can easily happen 
(especially with a new engine that you're trying to fire) is the fuel washes 
down the cylinder walls and removes the oil that seals the rings. Check your 
compression.......if its low, squirt some oil in the cylinders and check the 
compression again. Hopefully that is your problem and you'll be listening to 
your engine purr soon.

Good Luck, Ryan



_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com