Re: [Chrysler300] Speedometer

[Ray Jones <hurst300@xxxx>]

Hi Ivan
Start with your speedo cable. It may be dry, starting to break or have a
kink somewhere along the cable run. DON"T just unhook the end and try to
fill the cable housing up with WD40, it'll migrate into the speedo head.
Take it out, examine it and if OK, lube it with NeverSeize or a good grade
of moly grease. That should fix it, if not the problem is in your head (the
speedo's)
Good luck, Ray Jones

> From: ivan.regos@xxxx
> Date: Tue, 2 Jul 2002 09:22:14 +0200
> To: Chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] Speedometer
> 
> Hi all.
> I have this noice in my speedometer. I have disconnect the
> speedometer-cable, than it's no noice. So the problem is in the
> speedometermechanism.
> I wonder if there is any possibility to lubricate it without damage and if
> so with what?
> Sincerely Ivan from Sweden...
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> 
>