Re: [Chrysler300] 64 camshaft help, please

["Don Verity" <d.verity@xxxx>]

The place to be getting camshaft recommendations, especially for modified
engines is with the cam manufacturers themselves. They have the technical
personnel to handle these types of questions. There are far to many
variables for anyone to recommend a specific cam unless there set-up is
identical. Try Comp Cams, Crane, or one of the others.
300ly,
Don
----- Original Message -----
From: <greektruck@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, June 21, 2002 1:06 PM
Subject: [Chrysler300] 64 camshaft help, please


> hello ya'll. can somebody tell me please, i have a 64 300k short runner
long
> tube rams, 390 hp version.. i am going to replace the 413 with a 440 or a
> 500. i am going to retain the manifolds but know the cam must be the same
> duration to work with the rams. i read the response for the G, thats the
type
> of amswer i am hoping for, i need to custom order this, and i know a 108
is
> cool, a 470 lift is good on computer, but what duration .050 and adv., the
> lobe centerline?. HELP!!!!!!!!!!!!! i know -4 at crank also. so grind
> straight up. and use 3 keyway gear set. please help me with this asap. i
> cannot find definate answers and time is so close. THANK yOU
>
> p.s. i am going to use edelbrock heads
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>