RE: [Chrysler300] CAMSHAFT RECOMMONDATION

["Jennifer Allyn" <gearhead.girl@xxxx>]

That's right I have the one year only inline set up that is correct for
this motor...cross rams look like more fun...but I am stock.

-----Original Message-----
From: paulholm [mailto:paulholm@xxxx] 
Sent: Saturday, June 15, 2002 8:50 AM
To: gearhead.girl@xxxx
Subject: Re: [Chrysler300] CAMSHAFT RECOMMONDATION

Jennifer Allyn wrote:
> 
> Building the 413 out of my 1962 300.
> 
> It's being bored to .40 over, the crank is being machined 10-10, the
> block will be surfaced along with the heads.
> 
> I need to replace the camshaft and am wondering is anyone has a
> particular brand and spec to recommend. I'm considering a small
> performance camshaft (nothing too crazy) to go with this high
> compression motor.
> 
> Any ideas?
> 
> Thanks,
> Jennifer Allyn

IF you have the inline carbs set up instead of the crossram,
you might investagate the Mopar "purple" shaft and see if it
was more performance then the original stock cam for your motor.

-- 
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy