'57 Torqueflite (fluid w/water or coolant)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'57 Torqueflite (fluid w/water or coolant)



Hi,
I've put some pics i took when we disassembled the transmission.
You'll see the worn front clutches and the color of the "fluid"
!! Yesterday i said "water" but perhaps it's "coolant" . As i
said a shop tested the radiator and there's no leakage.
Pics are at http://www.ifrance.com/c-i-f/tq.htm

If the replacement screws held, we have to conclude that the
failed screws
were the wrong grade of steel. I assume you are sure the
conversion from US
specs (inch pounds?) to European specs (dyne cm?) were done
correctly?
It seems that the screws were weaken (heat ?). The torque was 15
to 20 ft.lbs (we have a torque wrench with US scale) and the
screws broke before, perhaps at 5 ft.lbs.

B/T/W.......I wouldn't re-use the rear clutches, even if they
appeared good. The clutch materail is absorbent, and still could
be mixed with water. I'd not want to take a chance; changing
them is cheap compared to rebuilding again.

We've put new rear clutches (and new rings, new gasket, etc..)


--
Philippe COURANT (Pau, France)
Imperial 57 Crown convertible
Buick 58 Roadmaster sedan

- American Car Club de France (ACCF) : http://www.accf.com

- Chrysler Imperial France : http://www.ifrance.com/c-i-f

- Cadillac " Standard of Excellence " :
http://www.ifrance.com/accf-cad

- SportsCars : http://www.ifrance.com/accf-sprtcar



[Non-text portions of this message have been removed]





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.