Re: [Chrysler300] 300 F Wheel Covers

["Richard Osborne" <richard@xxxx>]

Terry,

After an unsuccessful try at painting my G covers last year, I strongly
recommend removing the paint, priming and then re-paint. My difficulty
came from the Amorall and other silicones that had been used on the
tires. This sprayed, spread and dripped onto the covers. The problem did
not show up during my primer stage, only after color was applied. The
fish eyes were VERY bad.

Best regards,

Richard Osborne


>>> <pennsy300@xxxx> 01/14/02 07:05PM >>>
I'm "refreshing" the wheelcovers on my 300 F, using the Club's new
plastic 
medallions. I have successfully disassembled the covers, and I have
the 
correct red paint for the center of the wheelcovers. Does anyone out
there 
have any experience with painting these items? Should I use a primer
to aid 
in paint adhesion? Should I roughen up the remnents of the existing
red 
paint? Anything else? Thanks. Terry McTaggart

------------------------ Yahoo! Groups Sponsor

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx 

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm 

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx 



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/