RE: [Chrysler300] 300 G motor oil questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300 G motor oil questions



Just pulled the 'stick out of my '61 NYer, because it
was here. It's about 26 1/4" long, the stopper is
anchored at around 23 1/2". It's sort of a cup-shaped
affair. George Riehl once told me their was a small
freeze plug available that made for a decent
replacement...just make a hole in it. Maybe yours
just fell off. It fell off my G's stick, too.

Andy

--- john_nowosacki@xxxx wrote:
> Sounds like a classic case of blow-by to me.
> How old is the engine? Ever been rebuilt?
> If it has the California PCV, the hose will be
> attached to the balance tube
> between the rams (which will have a nipple for the
> hose that non-PCV valve
> cars won't have. The valve itself will be in the
> passenger side rocker
> cover near the back.
> I suppose any of us with G's could measure the
> dipstick from our cars and
> let you know the particulars, but I don't know off
> the top of my head.
> John 
> G vert
> 
> -----Original Message-----
> From: Myles Wallace [mailto:myles1@xxxx]
> Sent: Friday, November 16, 2001 7:26 AM
> To: Chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] 300 G motor oil questions
> 
> 
> A couple general and specific questions regarding
> engine oil for my 300 G
> project.
> 
> I changed the oil recently with 5 quarts of 10W/40 
> -- any thoughts on the
> grade which is recommended? 
> 
> The oil tube and stick do not appear to be original
> (no stopper on the stick
> like the transmission stick). What is the factory
> length of the stick? Any
> channels into where one (used, or repo) can be
> acquired?
> 
> Lastly, I have an oil leak and it appears to be
> coming directly from the
> filler cap. With the oil change I cleaned the cap
> and resoaked it in oil.
> What could be causing a decent amount of oil lose
> through the cap? 
> - Could it be air coming through the stick
> tube described above? 
> - What about a bad PCV value (frankly I
> can't seem to locate one
> --- do these 413 max wedge cross rams have one?) 
> - Or could it be a vacuum leak (I do have
> the lines to the
> air/heater controls disconnected as I work on the
> switch in the
> console) 
> 
> As always, thanks for the input. BTW, planning on
> giving an update on my
> electrical challenges soon -- thanks for all the
> feedback -- most helpful.
> 
> Myles
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm 
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/ 
> 
> 


__________________________________________________
Do You Yahoo!?
Find the one for you at Yahoo! Personals
http://personals.yahoo.com




Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.