[Chrysler300] 57 300 hemi
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 57 300 hemi



I have a 57 300 that I am working on and I can't get the motor to run. It most likely hasn't been started since the 70's. The engine is in time,has good spark, is getting fuel--firing order is correct----points are set right,new plugs are gaped right----after I was unsuccessful in starting engine, I had two good Mopar engine guys to check everything and they also say motor should run-----Compression ='s 90---140---120---110---80---60---60---150----I oiled cylinders,turned motor over----cleaned plugs-----motor turns fast enough to start-----I put a jumper on it and ran it fast several times but it acts like it wants to start----sometimes---but never will. Any suggestions before I tear it down--Johnnie Slayton

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.