Re: [Chrysler300] Fasteners- suppliers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Fasteners- suppliers



quadshop@xxxxxxxx wrote:

> Ryan Hill (Vancouver, B.C.)

> >. I'm tired of media blasting or wire brushing all of these
> >bolts!! Locally I've come up with nothing. Can anyone help?

when this situation faced me, I gave it a little thought and came up
with this.

I have a 4"x16"  piece of 1/4" steel that I have welded sets of nuts to.
On one side are groupings of 5 each, of National Course nuts ranging from 
1/4" to 1/2"
On the other side I have the National Fine.

Just screw in your bolts till they bottom out and this then holds the bolts
in place for you,  when media blasting I can do 30 a side at one time.
IF one side is fully loaded, it weighs enough so that is is pretty stable.


(Pat. Pend)   :-)

-- 
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.