Re: [Chrysler300] Carb Return Springs

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

I need the correct carb return springs for my 62 300---413 with inline
fours.  I fabricated the brackets, so if any one had the brackets that would
be helpful too.  I also need a power window switch for the car.the four one,
on the drivers side.  If anyone can help, please call or email.

Jennifer Allyn

We have been using the Summit Racing P/N GAR-09012BK dual spring set up for
safety reasons. Also available from NAPA,  BUT, not available in designer
colors as they are from  Summit. Should be readily available from speed
shops which we do not have readily at hand. This dual spring thing should be
safer than OE Chrysler part but not OE correct obviously.

Warren Anderson
Sedona, AZ



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/