RE: [Chrysler300] G Freeze Plugs Part 2

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

Richard,

Last weekend I measured the expansion plug(s) in a spare set of heads I have
for my G.  They measured 1-3/8".  having said that, the plugs were installed
in the heads and I was not able to insert the inside calipers in the bore to
do a precision measurement.  If, as others have posted, some of these plugs
are 1/64" larger, 1-3/8" may not be accurate.

If it were my car, I would go with 1-3/8" plugs and check the fit.  If
loose, go 1/64" larger.

Bob J




------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
---------------------------------------------------------------------~->

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/