[Chrysler300] Digest Number 65

[<Chrysler300@xxxxxxxxxxxxxxx>]

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm 

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


------------------------------------------------------------------------

There are 3 messages in this issue.

Topics in this digest:

      1. Re: '61 Torqueflites
           From: "Don Verity" <d.verity@xxxxxxxx>
      2. Car Covers
           From: "Rusty and Thelma Roe" <saxblowr@xxxxxxxx>
      3. Computer hard drive goes soft....
           From: lajugle@xxxxxxxxxxxx


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Thu, 25 Oct 2001 08:57:38 -0400
   From: "Don Verity" <d.verity@xxxxxxxx>
Subject: Re: '61 Torqueflites

Hi John,
  The 61 torqueflite uses a screen for a filter and it is usually just
cleaned or left alone. If your transmission is working OK and not leaking
at
the pan, you can change the fluid by removing the dipstick tube. The
torque
converter also has a drain plug that is accessed by removing the bell
housing shield and rotating the engine until the drain plug is on the
bottom. Use type F fluid, about 10-11 quarts for a complete fill.
  All big blocks use basically the same gasket set except for the valve
cover gaskets and the intake gasket. Any good parts store can get them.
300ly,
      Don
----- Original Message -----
From: <jrcote56@xxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, October 24, 2001 1:34 PM
Subject: [Chrysler300] '61 Torqueflites


> Hi all,
> Need some info and advice.
> Are all 1961 Chrysler Torqueflites the same? (ie; Newports, New Yorkers,
and
> 300G's.)
> What is the model number if all the same? (ie; 727, 745?)
> Is the '62 Torqueflite the same?
>
> I'm in need of filter and gasket set for my '61 Newport torqueflite and
NAPA
> only has listing for a '62. (NAPA # 1-7956)
>
> Any sources for filter and gasket set for my '61 Newport (361 engine) ??
> Thanks,
> John Cote,
> '61 Newport (300 wanabe)
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>



________________________________________________________________________
________________________________________________________________________

Message: 2
   Date: Thu, 25 Oct 2001 07:43:12 -0700 (Pacific Daylight Time)
   From: "Rusty and Thelma Roe" <saxblowr@xxxxxxxx>
Subject: Car Covers

Custom car covers made of various types of materials (plush, indoor,
outdoor, etc) can be purchased at Big Sky car covers in Bozeman Montana or
from California car covers...both can be found on the internet via search
engine and then just e-mail them or call them for an estimate.  These are
exact fit covers and usually run about $200 to $250....Rusty in Oregon

[Non-text portions of this message have been removed]



________________________________________________________________________
________________________________________________________________________

Message: 3
   Date: Thu, 25 Oct 2001 20:18:44 -0000
   From: lajugle@xxxxxxxxxxxx
Subject: Computer hard drive goes soft....

...and I've been in limbo since 9/12/01.  New e-mail is now 
lajugle@xxxxxxxxx  Old e-mail supposed to be forwarded as of today, 
but who knows. My white '57 now running but I need under dash wiring 
loom. 
Dave Schwandt: Got any in stock? !!!    L.Andrew Jugle, Elmhurst,IL



________________________________________________________________________
________________________________________________________________________



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>