|
|
Extreme Veteran
Posts: 377
| Hey folks been a while since me been on here. Ok anyone know how to get the door glass out of the metal thing it is clamped in for a 1960 2 door Plymouth Fury. I heard once there is a clip that goes through it. This thing doesn't have anything like that. It is like it is literally squished between the metal thing that holds it.
Thank you for any help. |
|
|
|
Extreme Veteran
Posts: 365
| I have never done t myself but, i watched the fellow in the glass shop do mine. He slid a knife between the glass and rubber on both sides then took a block of wood and a rubber mallet and knocked it off. Good luck.
Del |
|
|
|
Expert
Posts: 2315
Location: Eastern Iowa | MUCH MUCH easier SAID than DONE!!!
You will kore than likely break it in the process |
|
|
|
Regular
Posts: 62
Location: Springfield, MO | I had planned to remove the door glass on my chrysler to replace the rubber bedding, but once I broke one of the frame screws I decided that they aren't coming out. Sermey used black RTV or similar to re-seal their frame edges. |
|
|